Need Help?
We've got your back
Step by step instructions to make sure your installation is as easy as possible. Have your sign installed in as fast as 20 minutes. You can do this!
Step 1
Using our online design software. Choose from our many modern font options and we'll create and ship your masterpiece.
SHOP NOW
Step 2
Gather supplies: house numbers, template, Threaded rods, (not included: tape, caulk, drill, Measuring tape). Masonry, concrete, and stone installations may require a hammer drill.
Step 3
Twist in the provided threaded rods into the mounted spacers on the back of the letters. Use pliers if needed.
Step 4
Measure and tape template at desired location. Use the guide lines on the template for measurements. DO NOT use the paper edge as a guide line for measurements.
Step 5
Use a 1/4" drill bit for your specific surface. Drill straight holes as close to the middle of your circular drill marks and carefully remove the template.
Step 6
Dry fit your sign into your drilled holes. If the holes are too loose and the letters are not holding. Wrap a small piece of tape around the threaded rod as a temporary shimming.
Step 7
Using any all purpose outdoor caulk, apply a generous coating to the threaded rods and affix the sign to your installation surface.
